Availability: | |
---|---|
VS3024/48
Techfine
Features:
Pure sine wave output
WIFI/GPRS
MPPT Efficiency max 98%
Optional MPPT/PWM solar charge controller 30A-120A
DC start & automatic self-diagnostic fuction
Automatically send signal to start generator
High efficiency design for optimized battery performance
Selectable charging current based on applications
AC Start-up Voltage Auto Restart Voltage
Lead acid battery /Lithium battery
Features:
Pure sine wave output
WIFI/GPRS
MPPT Efficiency max 98%
Optional MPPT/PWM solar charge controller 30A-120A
DC start & automatic self-diagnostic fuction
Automatically send signal to start generator
High efficiency design for optimized battery performance
Selectable charging current based on applications
AC Start-up Voltage Auto Restart Voltage
Lead acid battery /Lithium battery
Model | VS3024/48 |
Input voltage | 220VAC(standard) |
Input voltage range | 154-264VAC +3V (Nor Model); 185-264VAC +3V (UPS model); 175 - 285VAC+ 3V(AVR Type) |
Input frequency | 50/60Hz±5% |
Out put power | 3000W |
2400W | |
AC model output Voltage | The output voltage under the mains is the same as the input voltage (with AVR function 220V+ 10%) |
AC model outout frequency | The output frequency under the mains is the same as the input frequency |
Bttery model output volage | 220VAC±10% |
Battery model output frequency | 50HZ/60HZ±1% |
Battery model output wave | Pure sine wave |
Battery type | External lead-acid battery,Gel battery. water battery or Lithium battery |
Battery voltage | 24/48VDC |
Battery charging voltage | 27.4/54.8VDC |
Maximum PV array power | 24V:1600W 48V:3200W |
Solar input voltage range | 24V: MPPT 30V-150VDC / PWM 30V-60VDC 48V; MPPT 60V-150VDC / PWM 60V-105VDC |
Maximum PV Display Open Circuit Voltage | 24V: MPPT150VDC / PWM360VDC 48V: MPPT 150VDC / PWM 105VDC |
Maximum solar charging current | 60A |
Maximum AC Charge Current | 30A/15A |
Battery charging voltage range | 154-280VAC |
Transfer time | ≤10ms (UPS Mode) /s20ms (INVMode) |
Load peak ratio | (MAX)3:1 |
Protective function | Under the mains: input overcurrent fuse. Under inverter. overload protection, short circuit protection, low voltage protection, (with battery anti-reverse connection board). |
Status Display | You can view parameters such as AC voltage, AC frequency, PV voltage, PV current, output voltage, output frequency, battery voltage, load current and other parameters by turming the page keys. |
Voice prompt | 1. Low battery protection buzzer long beep 2. Low battery buzzer beeps every second 3. Overload buzzer beeps 4. When the overload is less than 130%,the buzzer will sound every second, and the output will be turned off after 30S. When the overload is greater than 150%, the output will be turmned off after 300mS. 5. Machine fault buzzer beeps |
Operating temperature | 0℃-40℃ |
Storage temperature | -15℃~-45°C |
Relative temperature | -10°C~ 90°C no condensation |
Noise | < 45dB |
Model | VS3024/48 |
Input voltage | 220VAC(standard) |
Input voltage range | 154-264VAC +3V (Nor Model); 185-264VAC +3V (UPS model); 175 - 285VAC+ 3V(AVR Type) |
Input frequency | 50/60Hz±5% |
Out put power | 3000W |
2400W | |
AC model output Voltage | The output voltage under the mains is the same as the input voltage (with AVR function 220V+ 10%) |
AC model outout frequency | The output frequency under the mains is the same as the input frequency |
Bttery model output volage | 220VAC±10% |
Battery model output frequency | 50HZ/60HZ±1% |
Battery model output wave | Pure sine wave |
Battery type | External lead-acid battery,Gel battery. water battery or Lithium battery |
Battery voltage | 24/48VDC |
Battery charging voltage | 27.4/54.8VDC |
Maximum PV array power | 24V:1600W 48V:3200W |
Solar input voltage range | 24V: MPPT 30V-150VDC / PWM 30V-60VDC 48V; MPPT 60V-150VDC / PWM 60V-105VDC |
Maximum PV Display Open Circuit Voltage | 24V: MPPT150VDC / PWM360VDC 48V: MPPT 150VDC / PWM 105VDC |
Maximum solar charging current | 60A |
Maximum AC Charge Current | 30A/15A |
Battery charging voltage range | 154-280VAC |
Transfer time | ≤10ms (UPS Mode) /s20ms (INVMode) |
Load peak ratio | (MAX)3:1 |
Protective function | Under the mains: input overcurrent fuse. Under inverter. overload protection, short circuit protection, low voltage protection, (with battery anti-reverse connection board). |
Status Display | You can view parameters such as AC voltage, AC frequency, PV voltage, PV current, output voltage, output frequency, battery voltage, load current and other parameters by turming the page keys. |
Voice prompt | 1. Low battery protection buzzer long beep 2. Low battery buzzer beeps every second 3. Overload buzzer beeps 4. When the overload is less than 130%,the buzzer will sound every second, and the output will be turned off after 30S. When the overload is greater than 150%, the output will be turmned off after 300mS. 5. Machine fault buzzer beeps |
Operating temperature | 0℃-40℃ |
Storage temperature | -15℃~-45°C |
Relative temperature | -10°C~ 90°C no condensation |
Noise | < 45dB |