Availability: | |
---|---|
JV5048AM8V
Techfine
The Techfine China solar inverter 5000VA is your ideal solution for off-grid energy. This 4000W solar power inverter boasts low no-load loss, consuming less than half the energy of typical models.
With a pure sine wave output, this 48V solar inverter adapts to various loads, ensuring reliable performance for your home. It features output short-circuit protection and customizable settings to meet your specific needs.
The built-in MPPT controller supports up to 245V and 100A, optimizing solar power capture. Plus, with standard BMS and RS232 communication, you can monitor your system effortlessly. This home solar power inverter delivers the efficiency and reliability you need.
The Techfine China solar inverter 5000VA is your ideal solution for off-grid energy. This 4000W solar power inverter boasts low no-load loss, consuming less than half the energy of typical models.
With a pure sine wave output, this 48V solar inverter adapts to various loads, ensuring reliable performance for your home. It features output short-circuit protection and customizable settings to meet your specific needs.
The built-in MPPT controller supports up to 245V and 100A, optimizing solar power capture. Plus, with standard BMS and RS232 communication, you can monitor your system effortlessly. This home solar power inverter delivers the efficiency and reliability you need.
Model | JV5048AM8V |
Rated output power | 4000W |
Power Input | 220VAC (standard) / 110VAC (customized) |
Input voltage range | 220V model: 154-264VAC±3V (normal mode) 185-264VAC±3V (UPS mode) \110V model: 77-132VAC±3V (normal mode) 92-132VAC±3V (UPS mode) |
Input frequency | 50/60Hz±5% |
OUTPUT | |
Output voltage under AC power | The output voltage under AC power is the same as the input voltage |
Output frequency under AC power | The output frequency under AC power is the same as the input frequency |
Output voltage under inverter mode | 220VAC±10% (110VAC±10%) |
Output frequency under inverter mode | 50HZ or 60HZ±1% |
Output waveform under inverter mode | pure Sine Wave |
BATTERY & CHARGE | |
Battery Type | External lead-acid battery or water battery or lithium battery |
Battery voltage | 48VDC |
Battery charging voltage | 54.8VDC |
PV INPUT | |
Maximum PV array power | 5400W |
PV input voltage range(MPPT) | 60-245VDC |
maximum photovoltaic open-circuit voltage | 245VDC |
Optimal Vmp operating range | 60-170VDC |
maximum solar charging current | 100A |
AC INPUT | |
maximum AC charging current | 40A(default32A) |
EFF | |
Conversion time | ≤10ms(UPS mode)/≤20ms(normal mode) |
Load peak ratio | (MAX)3:1 |
Standby power (W) | encapsulated toroidal transformer |
32W | |
PROTECT | |
Protection function | Under grid power: input overcurrent circuit breaker protection |
Under inverter operation: overload protection, short circuit protection, low voltage protection, battery reverse polarity protection (fuse) | |
Status display | color segment display with LED indicator |
view parameters such as AC voltage, AC frequency, PV voltage, PV current, output voltage, output frequency, battery voltage, and load current using the page turning key。 | |
LED displays mains power, charging status, inverter status, and fault status | |
Audible alert | The buzzer produces different alarm sounds based on the fault codes, distinguished by long and short tones |
ENVIRONMENTAL PARAMETERS | |
Operating temperature | -10℃~50℃ |
Storage temperature | -15℃~45℃ |
Relative temperature | -10℃~90℃ non-condensing |
Noise | <45dB |
PHYSICAL PARAMETERS | |
Machine dimensions(L*W*H)mm | 535*335*170MM(without mounting bracket) |
Outer packaging dimensions(L*W*H)mm | 650*470*247MM(foam + cardboard box) |
Model | JV5048AM8V |
Rated output power | 4000W |
Power Input | 220VAC (standard) / 110VAC (customized) |
Input voltage range | 220V model: 154-264VAC±3V (normal mode) 185-264VAC±3V (UPS mode) \110V model: 77-132VAC±3V (normal mode) 92-132VAC±3V (UPS mode) |
Input frequency | 50/60Hz±5% |
OUTPUT | |
Output voltage under AC power | The output voltage under AC power is the same as the input voltage |
Output frequency under AC power | The output frequency under AC power is the same as the input frequency |
Output voltage under inverter mode | 220VAC±10% (110VAC±10%) |
Output frequency under inverter mode | 50HZ or 60HZ±1% |
Output waveform under inverter mode | pure Sine Wave |
BATTERY & CHARGE | |
Battery Type | External lead-acid battery or water battery or lithium battery |
Battery voltage | 48VDC |
Battery charging voltage | 54.8VDC |
PV INPUT | |
Maximum PV array power | 5400W |
PV input voltage range(MPPT) | 60-245VDC |
maximum photovoltaic open-circuit voltage | 245VDC |
Optimal Vmp operating range | 60-170VDC |
maximum solar charging current | 100A |
AC INPUT | |
maximum AC charging current | 40A(default32A) |
EFF | |
Conversion time | ≤10ms(UPS mode)/≤20ms(normal mode) |
Load peak ratio | (MAX)3:1 |
Standby power (W) | encapsulated toroidal transformer |
32W | |
PROTECT | |
Protection function | Under grid power: input overcurrent circuit breaker protection |
Under inverter operation: overload protection, short circuit protection, low voltage protection, battery reverse polarity protection (fuse) | |
Status display | color segment display with LED indicator |
view parameters such as AC voltage, AC frequency, PV voltage, PV current, output voltage, output frequency, battery voltage, and load current using the page turning key。 | |
LED displays mains power, charging status, inverter status, and fault status | |
Audible alert | The buzzer produces different alarm sounds based on the fault codes, distinguished by long and short tones |
ENVIRONMENTAL PARAMETERS | |
Operating temperature | -10℃~50℃ |
Storage temperature | -15℃~45℃ |
Relative temperature | -10℃~90℃ non-condensing |
Noise | <45dB |
PHYSICAL PARAMETERS | |
Machine dimensions(L*W*H)mm | 535*335*170MM(without mounting bracket) |
Outer packaging dimensions(L*W*H)mm | 650*470*247MM(foam + cardboard box) |