Availability: | |
---|---|
KA18048SS
Techfine
Large Touch Screen : Real-time system status at a glance.
Tower-Type Terminal Block : Simplifies installation and maintenance.
Low Voltage Input : High power performance with low battery voltage.
Multiple PV Inputs : Maximizes solar energy utilization and complements mains power.
Load Versatility : Adapts to various load conditions for consistent operation.
Fast Charging : High-power current for quick and efficient charging.
Rich Interfaces : RS232, RS485, and dry contacts for flexible communication.
Grid-Connected Function : Enables seamless energy sharing with the grid.
Lithium Battery Support : Intelligent charge/discharge management for multiple protocols.
Large Touch Screen : Real-time system status at a glance.
Tower-Type Terminal Block : Simplifies installation and maintenance.
Low Voltage Input : High power performance with low battery voltage.
Multiple PV Inputs : Maximizes solar energy utilization and complements mains power.
Load Versatility : Adapts to various load conditions for consistent operation.
Fast Charging : High-power current for quick and efficient charging.
Rich Interfaces : RS232, RS485, and dry contacts for flexible communication.
Grid-Connected Function : Enables seamless energy sharing with the grid.
Lithium Battery Support : Intelligent charge/discharge management for multiple protocols.
High frequency KA Series inverter technical parameters (selection guide) | |||
Three phase mode | |||
Factory model | KA18048SS | KA30048SS | |
Inter | Input format | Three-phase+N+PE | |
Rated input voltage | 3 x 380VAC/400VAC (3 phase + N line) | ||
voltage range | 155-483VAC±3V (normal mode) 295-483VAC±3V (UPS mode) | ||
Frequency Range | 50Hz/60Hz (adaptive) | ||
Output | Output rated power | 18000W | 30000W |
The output voltage | 380VAC±5% | ||
Output frequency | 50/60Hz±0.1% | ||
waveform | pure sine wave | ||
Switching time (settable) | Computer equipment 10ms, household appliances 20ms | ||
Peak power | 30000W | 60000W | |
Overload capacity | Battery mode: 21s@105%~150% Load 11s@150%~200% Load 400ms@>200% Load | ||
Grid-connected operation | The output voltage | 380VAC | |
Feed into grid voltage range | 337-437VA | ||
Feed into the grid frequency range | 49-51±1Hz/59-61±1Hz | ||
Nominal output current | 3×26.9A | 3×47.8A | |
Power factor range | >0.99 | ||
Maximum conversion efficiency (DC/AC) | 98% | ||
Battery | Rated voltage | 48Vdc | |
Constant charging voltage (can be set) | 56.4Vdc | ||
Float charging voltage (can be set) | 54Vdc | ||
Charger | PV charging method | Three-way MPPT | Six-channel MPPT |
PV maximum input power | 3×7500W | 6×5500W | |
MPPT input voltage range | 60~500Vdc | 90~500Vdc | |
Optimum Vmp operating range | 300~400Vdc | ||
Maximum PV input voltage | 500Vdc | ||
Maximum PV input current | 3×27A | 6×18A | |
Maximum PV charging current | 360A | 450A | |
Maximum mains charging current | 300A | 450A | |
Maximum charging current | 360A | 450A | |
Show | LCD interface | Can display operating mode/load/input/output, etc. | |
Interface | RS232 | Baud rate 2400 | |
Expansion slot communication interface | Lithium battery BMS communication card, WIFI card, dry contact card, etc. | ||
Environmental parameters | Operating environment temperature | -10~50℃ | |
Operating environment humidity | 20%~95% (no condensation) | ||
Storage temperature | -15~60℃ | ||
Altitude | The altitude should not exceed 1000m, derating above 1000m, up to 4000m, refer to IEC62040 | ||
noise | ≤50db | ||
Physical parameters | Depth × width × height (mm) | 465*500*500 | undefined |
Weight(for reference)KG | 50.5 | TBD | |
Standards and Certifications | EN-IEC 60335-1, EN-IEC 60335-2-29, IEC 62109-1 |
High frequency KA Series inverter technical parameters (selection guide) | |||
Three phase mode | |||
Factory model | KA18048SS | KA30048SS | |
Inter | Input format | Three-phase+N+PE | |
Rated input voltage | 3 x 380VAC/400VAC (3 phase + N line) | ||
voltage range | 155-483VAC±3V (normal mode) 295-483VAC±3V (UPS mode) | ||
Frequency Range | 50Hz/60Hz (adaptive) | ||
Output | Output rated power | 18000W | 30000W |
The output voltage | 380VAC±5% | ||
Output frequency | 50/60Hz±0.1% | ||
waveform | pure sine wave | ||
Switching time (settable) | Computer equipment 10ms, household appliances 20ms | ||
Peak power | 30000W | 60000W | |
Overload capacity | Battery mode: 21s@105%~150% Load 11s@150%~200% Load 400ms@>200% Load | ||
Grid-connected operation | The output voltage | 380VAC | |
Feed into grid voltage range | 337-437VA | ||
Feed into the grid frequency range | 49-51±1Hz/59-61±1Hz | ||
Nominal output current | 3×26.9A | 3×47.8A | |
Power factor range | >0.99 | ||
Maximum conversion efficiency (DC/AC) | 98% | ||
Battery | Rated voltage | 48Vdc | |
Constant charging voltage (can be set) | 56.4Vdc | ||
Float charging voltage (can be set) | 54Vdc | ||
Charger | PV charging method | Three-way MPPT | Six-channel MPPT |
PV maximum input power | 3×7500W | 6×5500W | |
MPPT input voltage range | 60~500Vdc | 90~500Vdc | |
Optimum Vmp operating range | 300~400Vdc | ||
Maximum PV input voltage | 500Vdc | ||
Maximum PV input current | 3×27A | 6×18A | |
Maximum PV charging current | 360A | 450A | |
Maximum mains charging current | 300A | 450A | |
Maximum charging current | 360A | 450A | |
Show | LCD interface | Can display operating mode/load/input/output, etc. | |
Interface | RS232 | Baud rate 2400 | |
Expansion slot communication interface | Lithium battery BMS communication card, WIFI card, dry contact card, etc. | ||
Environmental parameters | Operating environment temperature | -10~50℃ | |
Operating environment humidity | 20%~95% (no condensation) | ||
Storage temperature | -15~60℃ | ||
Altitude | The altitude should not exceed 1000m, derating above 1000m, up to 4000m, refer to IEC62040 | ||
noise | ≤50db | ||
Physical parameters | Depth × width × height (mm) | 465*500*500 | undefined |
Weight(for reference)KG | 50.5 | TBD | |
Standards and Certifications | EN-IEC 60335-1, EN-IEC 60335-2-29, IEC 62109-1 |